How GoConex Works

Simple wire-free switching explained.

How GoConex Works

Simple wire-free switching explained.

How GoConex wireless switches work Switches Controllers

GoConex wire-free switches send “on”, “off”, or “dim” commands to controllers, which send electrical current to connected electrical loads.

SWITCHES

Press a GoConex switch to send an “on”, “off”, or “dim” command.

CONTROLLERS

GoConex controllers are installed in electrical boxes and control the power for connected electrical loads.

Create Any Switch Combination with Wireless Connection

Create any switching combination at any time during or after construction.

GoConex controllers and switches use bi-directional RF communication enable true wire-free switching. Once a controller is paired to a switch, it will remember the pairing even if power to the controller is turned off.

Pairing Multiple Switches and Controllers

Four different switches can be paired with a GoConex Genius controller. GoConex Genius Pro controllers can be paired with 10 different switches.

A switch can be paired with an unlimited number of controllers.

Pairing Switches and Controllers Together

POWER THE CONTROLLER
Install a GoConex controller into an electrical box between the power and the load you want to switch. Connect the controller to power and to the lights/ motor you want to switch.

PAIR CONTROLLER AND SWITCH

Pair the controller and the switch together by (1) pushing the pair button on the controller, then (2) squeezing both ends of the light switch. (3) Push the pair button again to lock the bond.

MOUNT SWITCH
Affix the light switch to any surface and finish it with a cover plate. Or, keep the switch portable and use it as a remote control.

Smart Home and BMS Features

Controllers can be grouped to support future smart home and BMS functionality. Group controllers together using the same three steps: press “pair” on the first controller, press “pair” on the second controller, then press “pair” again on the first to confirm the group addition.

Repurpose When Required

As needs change, so can your switches. Controllers and switches can be reused in new locations or configurations.

Press and hold the “Pair” button on your controller for 5 seconds to clear saved pairing information. Now re-pair the controller with new switches.

GoConex for Business

Real value in commercial and residential applications.

GoConex Products

Browse GoConex Wire-Free Switches, Controllers and Dimmers