GoConex Genius Switches

Solve all your switch problems with one product.

GoConex Genius Switches

Solve all your switch problems with one product.

Genius for Residential Installations

GoConex Genius is designed for retail to home owners.

  • Fast, easy installation for residential retrofit and renovation
  • Switches and controllers can create any switch combination
  • Eliminate holes, damage, wire, and switch boxes
  • Switch placement options for tile, concrete, glass, wood, or as a portable switch
  • Control a single light with up to three different switches.

GoConex Genius products are not compatible with GoConex Basic products.

GoConex Genius Switch

  • Available in white (GSW) or almond (GSLA)
  • Decorator-style switch/ finish with a decorator wall plate
  • Sends and receives RF signals to and from controller(s)
  • Status light indicates that the switch was turned on/off or that the battery is low
  • Runs off a common a 3V CR2032 lithium button battery and has a 10 year battery life
  • Pairs to a controller or dimmer by pressing both ends at the same time when the controller “pair” button has been pushed
  • Attaches to any surface, wire-free – no holes, switch boxes or damage

GoConex Genius Control 10 (GC10)

  • Pairs to up to three switches
  • 100 ft. range
  • Fits into an existing switch box or junction box Only takes minutes to wire
  • On/off controller that gets wired to the load (e.g. light or motor), the hot/line and the neutral wires
  • Receives and sends RF signals from and to switch(es)
  • 10 amps resistive load, 120V, 50/60Hz
  • 1200 watts incandescent, 720 watts compact fluorescent and LED, or 360 watts fluorescent
  • Works with motors up to 1/6 HP at 120V and up to 1/2 HP at 240V
  • Operating temperature: -40°C to 50°C

GoConex Genius Dimmer 15 (GDT15)

  • Pairs to up to three switches
  • 100 ft. range
  • Fits into an existing switch box or junction box
  • Only takes minutes to wire
  • Dimmer controller that gets wired to the load (e.g. light or motor), the hot/line and the neutral wires
  • Receives and sends RF signals from and to switch(es)
  • 1.5 amps resistive load, 120V, 50/60Hz
  • 180 watts incandescent, 120 watts compact fluorescent and LED, or 64 watts fluorescent
  • Works with motors up to 1/16 HP at 120V and up to 1/10 HP at 240V
  • Operating temperature: -40°C to 50°C